Heavy duty rubber tiles of 91 cm x 91 cm can be easily assembled for coverage of large areas or individual work stations. Ergonomic benefit derived from a 13 mm thick worker platform with a bubble pattern for maximum fatigue relief in dry industrial environments.
The unique design and craftsmanship make the mat easy to handle and easy to install on-site. A tooled grid of 30 cm x 30 cm sections on the underside of the mat makes further customization quick and easy. Attachable bevelled edges prevent tripping and allow inside and outside corners.
Slip resistance rating R9 according to DIN 51130. Static dissipative natural rubber compound Meets IEC61340-4-1 (category DIF), measured resistance Rg 10⁶ - 10⁹ Ω, Rg 10⁶ - 10⁹ Ω. Fire classification Bfl-S1 tested according to EN 13501-1. Resistant to most industrial oils and suitable for welding areas.
Heavy duty rubber tiles of 91 cm x 91 cm can be easily assembled for coverage of large areas or individual work stations.
Ergonomic benefit derived from a 13 mm thick worker platform with a bubble pattern for maximum fatigue relief in dry industrial environments.
The unique design and craftsmanship make the mat easy to handle and easy to install on-site.
The unique design and craftsmanship make the mat easy to handle and easy to install on site
A tooled grid of 30 cm x 30 cm sections on the underside of the mat makes further customization quick and easy
Attachable bevelled edges prevent tripping and allow inside and outside corners
Resistant to most industrial oils and suitable for welding areas
General Description
Environment
Dry Areas
Group
Ergonomic, Anti-fatigue & Safety Matting
Special Characteristics
Free of DOP, free of DMF, free of ozone depleting substances, free of silicone and free of heavy metals|Meets IEC61340-4-1 (category DIF), measured resistance Rg 10⁶ - 10⁹ Ω, Rp 10⁶ - 10⁹ Ω|Resistant to most industrial oils and suitable for welding areas
Recommended Use
For placement in ESD assembly lines, picking, packing and logistics warehouses, individual work stations.
Special Remarks
Resistant to most industrial oils and suitable for welding areas.
Surface
Ergonomic bubble
Edges
Attachable bevelled edges are available
Usage Intensity
Heavy duty
Installation and Use
Custom Description
SkywalkerHD™ Ramp Nitrile male and female attachable bevels 91 cm, black or yellow.
Installation
The modular matting system consists of 91 cm x 91 cm modular tiles that connect easily and seamless for on site installation. Easy enough to connect by hand or with a rubber hammer. The mat is designed with cutting lines every 30 cm to easily disect the mat into 30 cm x 30 cm tiles each with female connectors. Cut along the cutting lines with a utility knife. Safety ramps are available to finish the matting installation with bevelled edges to prevent tripping on the mat. The safety ramps are also designed with cutting lines underneath the ramp to allow out and inside corners.
Cleaning Tip
Sweep regularly or dry mop the surface and the back of the mat. The surface can be damp-mopped with a mild soap/detergent.
Cleaning Remark
To sweep or dry mop the surface on a regular basis is important to maintain the static dissipative properties of the mat. A static control cleaning solution is advised but also a wet mop with mild soap that will not leave any residue can be used.
Technical Specification
Material Specifications
Static dissipative and fire retardant nitrile rubber compound
Process
Compression Moulding
Weight kg/m2
10
Tests
Fire Rating EU
EN 13501-1 Bfl-S1
Abrasion Resistance 1000
0.824
Breaking Load
4.80 Mpa
Elongation
210%
Hardness
67 Shore A
REACH Compliant
Reach compliant (Registration, Evaluation, Authorization and Restriction of Chemicals).
Slip Rating
R9
ESD RG
Rg 10⁶ - 10⁹ Ω
ESD RP
Rp 10⁶ - 10⁹ Ω
Sustainability
Recyclable material
Surface Flammability
Pass
Tear Strength
10.5N/mm
This website uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Please review our privacy policy for more information
