High-quality polyurethane foam anti-fatigue mats are reputed for their ultimate comfort in stationary standing positions. Its key characteristic of high thermal insulation performance is owed to a uniform closed cell structure wherein gas remains trapped. The integral skin adds to the compression force deflection properties (>120 according to ASTM 3574C), provides resistance to wear and is non-porous.
Environmental friendly, produced without the use of organic carbon-based blowing agents, therefore free of Freon. All four sides have bevelled edges to minimize tripping hazards.
Ideal for stationary standing workstations, sit-stand desks, packing stations, office environments, reception areas, wait stations, service counters, cashiers.
Meets IEC61340-4-1 (category DIF) measured resistance Rg 10⁶ - 10⁹ Ω, Rp 10⁶ - 10⁹ Ω.
This high quality type polyurethane foam is reputed for its ultimate comfort and longevity properties.
Its key characteristic of high thermal insulation performance is owed to a uniform closed cell structure wherein gas remains trapped.
Integral skin adds to the compression force deflection properties (>120 according to ASTM 3574C), provides resistance to wear and is non-porous.
All four sides have bevelled edges to minimize tripping hazards
Environmental friendly, produced without use of organic carbon-based blowing agents
Ergonomically designed bubble surface provides traction and fatigue relief
General Description
|
Environment |
Dry Areas |
Group |
Ergonomic, Anti-fatigue & Safety Matting |
Special Characteristics |
Free of DOP, free of DMF, free of ozone depleting substances, free of silicone and free of heavy metals|Meets IEC61340-4-1 (category DIF), measured resistance Rg 10⁶ - 10⁹ Ω, Rp 10⁶ - 10⁹ Ω |
Recommended Use |
Ideal for stationary standing workstations, sit-stand desks, packing stations, office environments, reception areas, wait stations, service counters, cashiers |
Surface |
Ergonomic bubble |
Edges |
Bevelled edges on all sides |
Usage Intensity |
Medium duty |
Installation and Use
|
Custom Description |
Available in black. |
Installation |
Loose lay with no installation required. |
Cleaning Tip |
Sweep regularly or dry mop the surface and the back of the mat. The surface can be damp-mopped with a mild soap/detergent. |
Cleaning Remark |
To sweep or dry mop the surface on a regular basis is important to maintain the static dissipative properties of the mat. A static control cleaning solution is advised but also a wet mop with mild soap that will not leave any residue can be used. |
Technical Specification
|
Material Specifications |
Static dissipative polyurethane foam |
Process |
Injection Moulding |
Weight kg/m2 |
4.8 |
Temperature Range |
- 40 ° C up to + 120 ° C |
Tests
|
Abrasion Resistance 1000 |
150 mg (2.5N) |
Elongation |
300% |
Hardness |
25 Shore A |
REACH Compliant |
Reach compliant (Registration, Evaluation, Authorization and Restriction of Chemicals). |
Slip Rating |
R10 |
ESD RG |
Rp 10⁶ - 10⁹ Ω |
ESD RP |
Rg 10⁶ - 10⁹ Ω |
Sustainability |
Recyclable material |
Surface Flammability |
Pass |
Tear Strength |
1.7 N/mm |