|
|
Wet/Dry Areas – Duckboards
| View the brochure: Ergonomic Anti-Fatigue and Safety Matting |
|
|
Wet/Dry Areas – Duckboards
- High quality anti-fatigue matting for use in areas where there can be frequent oil spilling.
- Made of 100% nitrile rubber compound or 100% PVC, designed to withstand industrial oils and harsh chemicals. Suited for multi-shift operations.
- Aggressive slip resistant surface.
- Non-shifting.
- Free of silicone therefore safe for vehicle painting facilities.
- Cleaning with detergent and water-jet is recommended for extended service life.
- Ergonomic benefit derived from 11 mm to 22 mm thick worker platform.
-
- Three standard size mats with highly visible nitrile rubber orange coloured borders included on 3 sides for added safety, comply with OSHA Code 1910-144.
- Drainage holes and raised studs provide aeration and allow fluids and debris to fall through, leaving a dry and tidy top surface.
- Slip resistance R10 according to DIN51130 and BG-rule BGR181.
- Overall thickness: 22 mm.
-
- Loose mats with strait edges allow coverage of any area through linking the mats lengthwise or side-by-side, held together by nitrile connector strips.
- Drainage holes and raised studs provide aeration and allow fluids and debris to fall through, leaving a dry and tidy top surface.
- Compatible with patented nitrile MD-Ramp System™ for smart safety bevelling solutions. Allow out- and inside corners.
- Overall thickness: 22 mm.
-
- Anti-fatigue matting designed for combined use with a sorbent.
- Ramps on 4 sides are raised to form a holder tray around the mat.
- Rough “gripper” surface prevents the sorbent from shifting.
- For industrial users who insist on comfort and strength.
- Raised studs on the backside provide aeration and excellent cushioning comfort.
- Inside measurements: width 82 cm to suit most standard rolls of sorbents. Lengths are incremental by 152 cm.
- Mat can be furnished with a few drainage holes to allow evacuation of excessive oil spills.
- Standard sizes are furnished with sorbent, refills are available.
- Overall thickness: 19 mm.
- Designed to yield a long service life.
-
- Anti-fatigue matting designed for combined use with a sorbent.
- Ramps on 4 sides are raised to form a holder tray around the mat.
- Rough “gripper” surface prevents the sorbent from shifting.
- Bubble design and moulded air pockets underneath provide buoyancy for basic fatigue relief.
- Inside measurements: width 82 cm x 152 cm to suit most standard rolls of sorbents.
- Mat is furnished with sorbent and refills are available.
- Thickness: 12,7 mm.
-
- Safety and comfort unite in this industrial strength anti-fatigue matting.
- Resistant to synthetic/hydraulic oils, providing the answer to slips and falls in wet, oily and greasy industrial environments.
- This product provides durable solutions to dangerous situations that workers experience regularly.
- Anti-slip surface designed for sure footing.
- Fire classification Cfl-s2 tested according to DIN EN ISO 13501 and Class 1 according to NFPA Safety code 101 and IBC 804.2 classification. Testing method ASTM E648-03.
- Bevelled ramps are available, eliminating trip hazards and allowing for easy access on to and off of the mat surface. Yellow safety borders comply with OSHA Code 1910-144.
- Custom built according to your ideal floor mat in shape and size.
-
- Reinforced structure, designed to withstand the heaviest loads.
- Custom built comes standard, in any shape or size mat.
- For extremely slippery areas, use Grip Step® versions.
- The perforated versions facilitate drainage of spills.
- Overall thickness 22,2 mm.
- Perforated
-
- Reinforced structure, designed to withstand the heaviest loads.
- Custom built comes standard, in any shape or size mat.
- For extremely slippery areas, use Grip Step® versions.
- The perforated versions facilitate drainage of spills.
- Overall thickness 22,2 mm.
- Perforated
- With abrasive coating
-
- Reinforced structure, designed to withstand the heaviest loads.
- Custom built comes standard, in any shape or size mat.
- For extremely slippery areas, use Grip Step® versions.
- Available in perforated versions.
- Overall thickness 22,2 mm.
- Non-perforated
-
- Reinforced structure, designed to withstand the heaviest loads.
- Custom built comes standard, in any shape or size mat.
- For extremely slippery areas, use Grip Step® versions.
- Available in perforated versions.
- Overall thickness 22,2 mm.
- Weight: ca. 15 kg per m2.
- Non-perforated
- With abrasive coating
-
- Drainage holes and raised studs provide aeration and allow fluids and debris to fall through, keeping the surface clear.
- Designed to withstand harsh chemicals, these three anti-fatigue mats offer simple solutions to almost any industrial or foodservice application.
- Aggressive slip resistant surface.
- Made of tough compounds, designed to yield a long service life.
- Free of silicone therefore safe for vehicle painting facilities.
- Thick rubber platform - more comfort - more durability.
- Strait edges allow coverage of any area through linking the mats lengthwise or side-by-side, held together by connectors.
- Optional attachable vinyl bevels for easy side or front access.
- Available on demand with fire classification Bfl-S1 according to EN13501-1.
- Overall thickness: 20 mm.
-
- Made of 100% PVC, resistant to industrial oils.
- Top surface with raised pyramid configuration enhances traction while channelling liquids.
- Slot perforations (13 mm x 48 mm) facilitate drainage of fluids.
- Easy roll-up, clean-up.
- Overall thickness: 11 mm.
-
- Made of 100% PVC, resistant to industrial oils.
- Top surface with raised pyramid configuration enhances traction while channelling liquids.
- With abrasive anti-slip coating.
- Slot perforations (13 mm x 48 mm) facilitate drainage of fluids.
- Easy roll-up, clean-up.
- Overall thickness: 11 mm.
-
- Moulded bevelled edges on all 4 sides for trip resistant & easy cart access.
- Resilient rubber to provide fatigue relief.
- Lightweight facilitates handling when cleaning.
- Overall thickness: 12,7 mm.
|
